| Xigmatek Pantheon CPC-T46DB Computer Case Launched |
| Written by Xigmatek |
| Tuesday, 26 October 2010 |
Xigmatek Pantheon CPC-T46DB Computer Case Launched
Pantheon - Rome's temple of gods. Big and impressive by a great architecture and dedicated engineering for all your hardware, Xigmatek proudly presents our latest exclusive chassis - the Pantheon. Decent design combined with features such as our tool free design for the 5.25" bays, 6 hot swap hdd cages including anti vibration, black interior and exterior, usb 3.0, 2 fan controllers, last but not least also the radiator support of 240/280mm radiator on the top. Get yourself a piece of ancient experience and flair and start the combat with Pantheon!
- Two 2.5"/3.5" HDD hot-swappable and front-opened HDD trays for easy plug and play removable storages.
- USB3.0 super speed front I/O and two fan RPM controllers for max. six fans on the top panel.
- Optimized cooling system with four push-pull HDD 12cm side blow fans, rear 14cm fan, and top 17cm fan allocation.
Pantheon Case Features:
- Two 2.5"/3.5" front-opened hot-swappable HDD trays.
- USB3.0 super-speed port and two fan speed control knobs on the top panel.
- Both side screw-less ODD holders with anti-vibration rubbers.
- Thumb screws for add-on card easy installation.
- Preinstalled 140mm rear black blades fan with white LED and LED is on/off switchable.
- Preinstalled two 120mm side blow HDD black blades fans with white LED and LED is on/off switchable.
- 240/280mm radiator, or two 12/14cm fan, or one 170mm fan available on the top panel.
- Big back window for CPU cooler backplate easy installation.
- Back holes and clips for cable management.
- Anti-vibration rubber and bottom dust filter for PSU.
CPC-T46DB Specifications:
| Product Name |
PANTHEON |
| Product Number |
CPC-T46DB-U01/U02/U03/U04 |
| Dimension |
206(W) x 543(H) x 500(D) mm (8.1*21.4*19.7 inches) |
| Drive Bay |
External x 4 with both side tool-free holders with anti-vibration rubbers. |
| Expansion Slot |
7 slots, 330mm free length for long card.(Thumb screws) |
| Motherboard Support |
ATX, Micro ATX (with cooler blackplate easy installation window) |
| Power Supply |
Standard P/S2 ATX/EPS power supply unit
1. Intake airflow hole with dust filter.
2. Available for face upward and downward installation.
3. Within anti-vibration rubber. |
| Cooling System |
Air-cooling Front Fan: Pre-installed 120mm white LED with black blades x 2 on HDD cage and LED is on/off switchable.(Max. four 120mm fans on HDD cage both side.) Rear Fan: Pre-installed 140mm white LED with black blades x 1 and LED is on/off switchable.(120mm fan is available) Side Fan: Pantheon-Original: Optional 120/140mm fan x 2 Pantheon-Window: None. Bottom Fan: Optional 120/140mm fan x 1 (with dust filter) Top Fan: Optional 120/140mm fan x 2 or 170mm fan*1. Fan Speed Control: Six fan speeds are adjustable synchronously by two knobs on top panel. |
| Water-cooling Water pipe holes x 4 (with rubber cover)
Available for 240/280mm radiator on the top.
Radiator size limitation inside of top panel : (L)290*(W)130*(H)42mm
|
| I/O Panel |
Top Panel: Power switch, Reset switch, USB3.0*1, USB2.0 x 2, e-SATA x 1, Audio in/out x 1 (HD Audio), two knobs of fan controller. |
Related Articles:
|
