| GELID Rev. 2 GX-7 CPU Cooler Announced |
| Monday, 20 May 2013 | ||
GELID Rev. 2 GX-7 CPU Cooler Announced
In comparison to its predecessor the Rev. 2 GX-7 included the Slim 12 PL Blue fan which is more compact, Design Concept:Traditional heat pipe arrangement of high-end heatsink heatpipes are usually soldered on one row. Therefore the heat absorption capacity of the outer heatpipe will be negatively affected when there are more than 5 heatpipes. To solve this problem a special array of heatpipes was used on Rev. 2 GX-7 to take full advantage of all 7 6mm heatpipe heat transfer capacity. On Rev. 2 GX-7 two heatpipes were soldered on top of three middle heatpipes. 
Traditional heatpipe arrangement Unique heatpipe arrangement on Rev. 2 GX-7 to take full advantage of all 7 heatpipe Air Flow Concept:The fins in the middle part of the heatsink of Rev. 2 GX-7 were designed in a V-shape. This allows the cooling air to reach the heatsink module more evenly. Thanks to some openings inside of the heatsink and near the heatpipes let fresh-air flows in from the top and the bottom to zones normally poorly ventilated and eliminates the creation of hotspots from building. The unique heatsink shape supports dual fans. Besides the multi-award winning high performance GC-Extreme thermal compound additionally mounting clips for AMD AM2/ AM2+/AM3/AM3+/FM1/ FM2 and Intel 775, 1366, 1155, 1156 sockets and back plates for Intel LGA 775, Core i5 and Core i7 boards are all included. The LGA 2011 mounting clip needs to be purchased separately. The cooler is RoHS and WEEE conform and carries a 3 year warranty. Please have a look at the installation manual and height restriction drawing. MSRP: USD 65 / Euro 45 Features:
|
||
