Archive Home arrow Reviews: arrow Antec TP3-650 Rev. A2 TruePower Trio 650W PSU








Antec TP3-650 Rev. A2 TruePower Trio 650W PSU E-mail
Reviews - Featured Reviews: Power
Written by Olin Coles   
Wednesday, 27 September 2006
Table of Contents: Page Index
Antec TP3-650 Rev. A2 TruePower Trio 650W PSU
Features and Specifications
Closer Look: TP3-650
New Features: Revision A2
Testing Voltage Regulation
Conclusion

Features & Specifications

TP3-650 Features

  • Universal Input, automatically adjusts for 100V to 240V power grids
  • Active Power Factor Correction (PFC) for environmentally friendlier power
  • Three 12V output circuits provide added system stability
  • Accurate power rating allows TruePower Trio to deliver its full rated power, 24 hours a day rated at 50ºC
  • Up to 85% efficiency
  • NEW! Full nylon sleeves on all cable groups
  • 120mm low noise cooling fan
  • Fan Only power connectors allow TruePower Trio to control case fan speeds, reducing total system noise
  • Dedicated outputs for stable output and less ripple noise
  • Feedback loop circuits for tighter load regulation (±3%) to maintain accurate voltage to all components
  • Heavy duty protection circuitry prevents damage resulting from short circuits (SCP), power overloads (OPP), over voltages (OVP), and under voltages (UVP)
  • 4 SATA connectors for Serial ATA drives
  • Two PCI-E connectors for PCI-Express video cards on 550W and 650W models, one connector on 430W model
  • MTBF: 80,000 hours at 50°C
  • Safety approvals: UL, CUL, FCC, TÜV, CE, C-tick, CCC, CB
  • Power Factor value up to 99%
  • Gold plated connectors for superior conductivity

Antec Specifications

Model: TP3 650
FEATURES
Maximum Power 650 Watts
Switches ATX Logic on-off
additional power rocker switch
Special Connectors ATX12V
3-pin Fan Sensor
Fan Only
SATA
Transient Response +5V,+12V and 3.3V outputs return to within 3% in less than 1ms for 20% load change.
P. G. Signal 100-500ms
Over Voltage Protection
recycle AC to reset
+5V trip point < +6.5V
+3.3V trip point < +4.1V
+12V trip point < +14.4V
Leakage Current < 3.5mA @ 115VAC
DIMENSIONS
Unit Size 5.9" (W) x 3.4" (H) x 5.5" (D)
14.9cm (W) x 8.5cm (H) x 14cm (D)
Net Weight 5lbs.; 2.3kg
INPUT
Input Voltage 115 VAC / 230VAC
Input Frequency Range 47Hz to 63Hz
Input Surge Current < 60A @ 115VAC
Input Current 10.0A for 115VAC
5 .0A for 230VAC
Hold-up Time > 12ms at Full Load
Efficiency up to 85%
EMI/RFI FCC Class B
CISPR22 Class
OUTPUT
+3.3V +5V +12V1 +12V2 +12V3 +5V SB -12V
Max. Load 24A* 30A* 19A* 19A 19A 3.0A 0.8A
Min. Load 0.5A 0.5A 1A 1A 1A 0A 0A
Load Reg. ±3% ±3% ±3% ±3% ±3% ±3% ±4%
Ripple V(p-p) 50mV 50mV 120mV 120mV 129mV 50mV 120mV
* +12V1, 12V2,12V3 maximum output 624 Watts max.
ENVIRONMENTAL
Operating Temp. 0 to 50° C
Operating Alt. Sea Level 10,000 ft.
Non-Operating Vibration Operating: 10-300 Hz, 0.5G, 3 axes, 1 hr. ea. axis
Non-operating: 10-300 Hz, 2.0G, 3 axes, 1 hr. ea. axis
MTBF 80,000 hrs. @ 50° C
Approvals UL, CUL, FCC Class B, CB, TÜV

Discuss this article in the Benchmark Review discussion forum.



 

Comments have been disabled by the administrator.

Search Benchmark Reviews

Like Benchmark Reviews on FacebookFollow Benchmark Reviews on Twitter